< Back ×
My Vehicle Change Vehicle
2010 GMC Yukon
< Back to View All
Timing Belts, Chains, Cams & Related Parts
- Department
- Prices
OEM (Genuine) 2010 GMC Yukon Camshaft
PartNumber: 12625436
Product Specifications- Notes: Tahoe, Yukon, Escalade; 5.3L
- Other Names: Camshaft
- Item Dimensions: 3.4 x 3.3 x 28.1 inches
- Item Weight: 14.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12593207
- Part Description: 2010 GMC Yukon Camshaft
Vehicle Fitment- 2010 GMC Yukon | SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
$316.37 MSRP:$502.32You Save: $185.95 (38%)OEM (Genuine) 2010 GMC Yukon Camshaft Asm
PartNumber: 12629698
Product Specifications- Notes: Tahoe, Yukon, Escalade
- Other Names: Camshaft
- Item Dimensions: 27.8 x 3.3 x 3.3 inches
- Item Weight: 14.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12612275
- Part Description: 2010 GMC Yukon Camshaft Asm
Vehicle Fitment- 2010 GMC Yukon | Denali Hybrid, Hybrid | 8 Cyl 6.0 L ELECTRIC/FLEX, 8 Cyl 6.0 L ELECTRIC/GAS
OEM (Genuine) 2010 GMC Yukon Camshaft Asm
PartNumber: 12623066
Product Specifications- Notes: Tahoe, Yukon, Escalade; 6.2L; All
- Other Names: Camshaft
- Item Dimensions: 3.3 x 3.3 x 27.8 inches
- Item Weight: 9.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12617374
- Part Description: 2010 GMC Yukon Camshaft Asm
Vehicle Fitment- 2010 GMC Yukon | Denali | 8 Cyl 6.2 L FLEX
FAQ for Camshaft Repair
Q: How to remove the Camshaft Position Actuator Solenoid Valve?
A:
You can remove a CMP actuator solenoid valve and the CMP actuator magnet.
By Bob
GM Specialist
29/10/2022Q: How to install the Camshaft Position Actuator Solenoid Valve?
A:
You can install the CMP actuator solenoid valve and the CMP actuator magnet.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the CMP actuator magnet bolts?
A:
The recommended torque is 12 Nm (106 lb in).
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the solenoid valve a first pass?
A:
The recommended torque is 65 Nm (48 lb-ft).
By Bob
GM Specialist
29/10/2022Q: How to install the Camshaft Position Actuator Magnet?
A:
You can install a NEW CMP actuator magnet gasket onto the CMP actuator magnet, the CMP actuator magnet to the front cover, the CMP actuator magnet bolts, connect the engine harness electrical connector to the CMP actuator magnet, and install the water pump.
By Bob
GM Specialist
29/10/2022Q: What should I notice in the Camshaft removal procedure?
A:
You should ensure that the teeth of the J 42386-A mesh with the teeth of the engine flywheel, and do not turn the crankshaft assembly after the timing chain has been removed to prevent damage to the piston assemblies or the valves. All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the J 42386-A bolts?
A:
The recommended torque is 50 Nm (37 lb-ft).
By Bob
GM Specialist
29/10/2022Q: What should I notice in the Camshaft installation procedure?
A:
All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings. The gasket surface on the engine block should be clean and free of dirt and/or debris.
By Bob
GM Specialist
29/10/2022Q: How to install the Camshaft Position Actuator?
A:
You can compress the timing chain tensioner guide and install the EN 46330, identify the alignment hole in the rear face of the CMP actuator and the locating pin on the front face of the camshaft, install the CMP actuator and timing chain, align the hole in the rear face of the CMP actuator with the locating pin on the front face of the camshaft. If necessary, rotate the camshaft or crankshaft sprockets to align the timing marks.
By Bob
GM Specialist
29/10/2022Q: How to remove the Camshaft Position Actuator Magnet?
A:
You can remove the water pump, disconnect the engine harness electrical connector from the camshaft position (CMP) actuator magnet, remove the CMP actuator magnet bolts and magnet, and discard the CMP actuator magnet gasket.
By Bob
GM Specialist
29/10/2022See more FAQs (7)