< Back ×
1999 Ford Expedition Driveline, Axles & 4WD
My Vehicle Change Vehicle
1999 Ford Expedition
$240.36Product Specifications- Notes: 8.8" Ring Gear; w/4.10 Axle Ratio
- Gear Ratio: 4.10
- Item Grade: Standard Replacement
- UPC: 019495105503
- Part Description: 1999 Ford Expedition OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$388.23Product Specifications- Notes: Master; 9.75 " w/3.000 " OD Pinion Tail Cup Ring Gear:;Master Kit; 9.75" Ring Gear;Master Kit; 9.75" Ring Gear w/ 3.00" O.D. Pinion Cup
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311471428
- Width: 2.50"
- Part Description: 1999 Ford Expedition Rear Master Differential Rebuild Kit
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$483.37Product Specifications- Notes: with 39" (990 mm) Long Driveshaft;Measurement taken from end of flange face to end of flange face
- Greasable: No
- Length: 39"
- Length (mm): 990
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: 1999 Ford Expedition Remanufactured Driveshaft/ Prop Shaft
Vehicle Fitment- 1999 Ford Expedition | All Trims | 8 Cyl 5.4L
$47.52Product Specifications- UPC: 805890580072
- Part Description: 1999 Ford Expedition Premium™ Rear Axle Shaft Repair Bearing
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$253.32Product Specifications- Notes: 8.8" Ring Gear; w/3.55 Axle Ratio
- Gear Ratio: 3.55
- Item Grade: Standard Replacement
- OE Part Number: 3L1Z4209AA, 5L3Z4209B, 8R3Z4209C, E3TZ-4209-J
- UPC: 019495105442
- Part Description: 1999 Ford Expedition OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$36.04 MSRP:$58.40You Save: $22.36 (39%)Product Specifications- Notes: Expedition, Navigator
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.8 x 0.7 x 3.8 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 1999 Ford Expedition Axle Seal
Vehicle Fitment- 1999 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
$203.83Product Specifications- Notes: Includes Bearing; Tag# 930P, 930R, 935P, 935R, 939P, or 939R; 9.75" Ring Gear
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 31.7"
- Material: Carbon Steel
- OE Part Number: YL1Z4234CA
- Spline Quantity: 34 Spline
- UPC: 019495225386
- Wheel Lug Quantity: 5
- Part Description: 1999 Ford Expedition OE Solutions Rear Passenger Side Axle Shaft
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$14.19Product Specifications- Notes: with 8.800in Ring Gear;10 Bolt;Rear
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 10
- Thickness (in): 0.031"
- UPC: 023913682552
- Part Description: 1999 Ford Expedition Axle Housing Cover Gasket
Vehicle Fitment- 1999 Ford Expedition | All Trims | 8 Cyl 4.6L
- 1999 Ford Expedition | All Trims | 8 Cyl 5.4L
$127.93Product Specifications- Notes: Master Kit; 8.80" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470964
- Width: 2.50"
- Part Description: 1999 Ford Expedition Rear Master Differential Rebuild Kit With Shims
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
- 1999 Ford Expedition | All Trims | 8 Cyl 4.6L
- 1999 Ford Expedition | All Trims | 8 Cyl 5.4L
$111.31Product Specifications- Notes: Std Kit; w/Ford Axle; Independent Front Susp; w/8.8in Ring Gear;Std Kit; w/Ford Axle; w/8.8in Ring Gear
- Part Description: 1999 Ford Expedition Front Differential Master Bearing Kit
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$230.78Product Specifications- Notes: 8.8" Ring Gear; w/4.56 Axle Ratio
- Gear Ratio: 4.56
- Item Grade: Standard Replacement
- UPC: 019495515678
- Part Description: 1999 Ford Expedition OE Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$18.57 MSRP:$26.67You Save: $8.10 (31%)Product Specifications- Notes: Expedition, Navigator
- Other Names: Oil Seal, Pinion Gear Seal, Pinion Seal
- Item Dimensions: 9.2 x 7.2 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: E8TZ-4676-C, F89Z-4676-AA
- Part Description: 1999 Ford Expedition Pinion Gear Seal
Vehicle Fitment- 1999 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
$99.16Product Specifications- ABS Ring Included: No
- Input Shaft Bolt Count: 6
- Input Shaft Connection Style: Bolt-On
- Length: 19 7/8"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 33
- Product Condition: Remanufactured
- Spindle Nut Included: No
- Part Description: 1999 Ford Expedition Remanufactured CV Axle Assembly
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$29.93Product Specifications- Notes: w/Borg-Warner 4406 Transfer Case; 2Spd; w/Part Time 4WD
- Type: A-1
- Part Description: 1999 Ford Expedition Driveshaft Center Support Bearing
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$99.66Product Specifications- Notes: Std Kit; 8.80" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470483
- Width: 2.50"
- Part Description: 1999 Ford Expedition Rear Differential Rebuild Kit
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
- 1999 Ford Expedition | All Trims | 8 Cyl 4.6L
- 1999 Ford Expedition | All Trims | 8 Cyl 5.4L
$15.40Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; 1.063" Bearing Cap Dia;Grease Fitting in Cross; Perf Grade
- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.622"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286512030
- Part Description: 1999 Ford Expedition Grade Performance™ Rear U-Joint
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$21.86Product Specifications- Notes: w/Borg-Warner 4406 Transfer Case; 2Spd; w/Part Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: 1999 Ford Expedition Driveshaft Center Support Bearing
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
- $18.57 MSRP:
$26.67You Save: $8.10 (31%)Product Specifications- Notes: Expedition, Navigator
- Other Names: Oil Seal, Pinion Gear Seal, Pinion Seal
- Item Dimensions: 9.2 x 7.2 x 1.0 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: E8TZ-4676-C, F89Z-4676-AA
- Part Description: 1999 Ford Expedition Pinion Gear Seal
Vehicle Fitment- 1999 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
$173.87Product Specifications- Notes: 8.8" Ring Gear; WDR Non-Locking Rear Differential; Tag# 802C, 802D, 802DA, 802F, 802J, 820C, 820D, 820DA, 820F, or 820J;8.8" Ring Gear; WFL Locking Rear Differential; Tag# 821C, 821D, 821DA, 821F, 821J, 825C, 825D, 825DA, 825F, or 825J
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 33.39"
- Material: Carbon Steel
- OE Part Number: F75Z4234KB
- Spline Quantity: 31 Spline
- UPC: 019495225355
- Wheel Lug Quantity: 5
- Part Description: 1999 Ford Expedition OE Solutions Rear Driver Side Axle Shaft
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$13.41Product Specifications- Notes: Std Grade; Sealed Unit; 1.188" Bearing Cap Dia
- Dimension: 1.188" Cap Diameter
- Height (Inch): 1.30
- Length (Inch): 4.0
- UPC: 031447983809
- Weight (Gross Pounds): 1.40
- Width (Inch): 4.0
- Part Description: 1999 Ford Expedition Grade Standard Non Greasable U-Joint
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$45.74Product Specifications- Notes: w/ 9.75" Ring Gear:
- Cone ID: 1.968"
- Cone Length: 1.141"
- Cone Radius: 0.16"
- UPC: 085311355469
- Part Description: 1999 Ford Expedition Rear Inner Axle Shaft Bearing
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$198.08Product Specifications- Notes: 8.8" Ring Gear; w/3.73 Axle Ratio
- Gear Ratio: 3.73
- Item Grade: Standard Replacement
- UPC: 037495175883
- Part Description: 1999 Ford Expedition Oe Solutions Rear Differential Ring And Pinion
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$19.07Product Specifications- Notes: w/Ford Axle; w/9.75in Ring Gear; 2nd Design; 3.0in Cup Bore; 0.906in Cup Length
- Part Description: 1999 Ford Expedition Rear Outer Differential Pinion Race
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$33.00 MSRP:$52.18You Save: $19.18 (37%)Product Specifications- Notes: Expedition, Navigator
- Location: Driver Side; Passenger Side
- Other Names: Axle Bearing, Axle Shaft Bearing, Bearing
- Item Dimensions: 3.9 x 1.5 x 3.8 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: E5TZ-1225-A, F75Z-1225-BA
- Part Description: 1999 Ford Expedition Axle Shaft Bearing
Vehicle Fitment- 1999 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
$200.73Product Specifications- Notes: 8.8" Ring Gear; WDR Non-Locking Rear Differential; Tag# 802C, 802D, 802DA, 802F, 802J, 820C, 820D, 820DA, 820F, or 820J;8.8" Ring Gear; WFL Locking Rear Differential; Tag# 821C, 821D, 821DA, 821F, 821J, 825C, 825D, 825DA, 825F, or 825J
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 31.75"
- Material: Carbon Steel
- OE Part Number: F75Z4234KA
- Spline Quantity: 31 Spline
- UPC: 019495225362
- Wheel Lug Quantity: 5
- Part Description: 1999 Ford Expedition OE Solutions Rear Passenger Side Axle Shaft
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; 1.188" Bearing Cap Dia
- Bearing Cap Diameter: 1.188"
- Lock Ring Size: 3.624"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501782
- Part Description: 1999 Ford Expedition Grade Performance™ Front U-Joint
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
$28.92Product Specifications- Notes: 9.75" Ring Gear
- Cone ID: 2.284"
- Cone Length: 0.866"
- Cone Radius: 0.16"
- OE Part Number: F75Z4221AA
- Outside Diameter: 3.780"
- UPC: 085311377362
- Part Description: 1999 Ford Expedition Rear Axle Shaft Bearing
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
SKF® Rear U Joint for 1999 Ford Expedition
PartNumber: UJ331C$17.42Product Specifications- Notes: (For Alum Drive Shaft);Adjustable Susp:; (For Alum Drive Shaft)
- Outer Diameter: 1.188"
- Outside Lock-Up 1: 3.622"
- UPC: 085311561549
- Part Description: 1999 Ford Expedition Rear U Joint
Vehicle Fitment- 1999 Ford Expedition | All Trims | 8 Cyl 4.6L
- 1999 Ford Expedition | All Trims | 8 Cyl 5.4L
$173.05Product Specifications- Notes: Includes Bearing; Tag# 930P, 930R, 935P, 935R, 939P, or 939R; 9.75" Ring Gear
- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 33.37"
- Material: Carbon Steel
- OE Part Number: YL1Z4234CB
- Spline Quantity: 34 Spline
- UPC: 019495225379
- Wheel Lug Quantity: 5
- Part Description: 1999 Ford Expedition OE Solutions Rear Driver Side Axle Shaft
Vehicle Fitment- 1999 Ford Expedition | All Trims | All Engines
- $33.00 MSRP:
$52.18You Save: $19.18 (37%)Product Specifications- Notes: Expedition, Navigator
- Location: Driver Side; Passenger Side
- Other Names: Axle Bearing, Axle Shaft Bearing, Bearing
- Item Dimensions: 3.9 x 1.5 x 3.8 inches
- Item Weight: 1.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: E5TZ-1225-A, F75Z-1225-BA
- Part Description: 1999 Ford Expedition Axle Shaft Bearing
Vehicle Fitment- 1999 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
1-30 of 164 Results
< Previous
12345
Next >