< Back ×
2000 Cadillac Escalade Driveline, Axles & 4WD
My Vehicle Change Vehicle
2000 Cadillac Escalade
Dorman® OE Solutions Rear Differential Ring And Pinion for 2000 Cadillac Escalade
PartNumber: 697-303$264.98Product Specifications- Notes: 8.625" Ring Gear; w/4.10 Axle Ratio
- Gear Ratio: 4.10
- Item Grade: Standard Replacement
- OE Part Number: 26009753, 3988515
- UPC: 019495105428
- Part Description: OE Solutions Rear Differential Ring And Pinion
$151.83Product Specifications- Notes: Master Kit; 8.50" Ring Gear:;Master; 8.50 " Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311471459
- Width: 2.50"
- Part Description: Rear Master Differential Rebuild Kit
$71.87Product Specifications- Notes: with 8.250in Ring Gear;with AAM Engine;10 Bolt;w/Independent Front Susp
- Contains Applications: Y
- Material: Molded Rubber And Metal
- Mount Hole Quantity: 10
- UPC: 023913682835
- Part Description: Axle Housing Cover Gasket
Dorman® OE Solutions Rear Differential Ring And Pinion for 2000 Cadillac Escalade
PartNumber: 697-301$249.80Product Specifications- Notes: w/3.73 Axle Ratio; 8.625" Ring Gear
- Gear Ratio: 3.73
- Item Grade: Standard Replacement
- OE Part Number: 12471280, 12479316, 1259441, 26035826, 26037712
- UPC: 019495105404
- Part Description: OE Solutions Rear Differential Ring And Pinion
$208.40Product Specifications- Notes: Std Kit; 9.25" Ring Gear
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311471206
- Width: 2.50"
- Part Description: Front Differential Rebuild Kit
$12.23 MSRP:$22.22You Save: $9.99 (45%)Product Specifications- Notes: All Models
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.6 x 3.7 x 0.7 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26037309, 15522060
- Part Description: Axle Seal
$21.86Product Specifications- Notes: w/New Process 243C Transfer Case; 2Spd; w/Part Time 4WD
- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: Driveshaft Center Support Bearing
$472.74Product Specifications- Notes: with 31-3/4" (806 mm) Long Driveshaft;Measurement is taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft; Supplied as new
- Greasable: Yes
- Length: 31.75"
- Length (mm): 806
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Remanufactured Driveshaft/ Prop Shaft
Dorman® OE Solutions Front Differential Ring And Pinion for 2000 Cadillac Escalade
PartNumber: 697-358$245.11Product Specifications- Notes: w/3.73 Axle Ratio; 8.25" Ring Gear; Alum Housing
- Gear Ratio: 3.73 Reverse
- Item Grade: Standard Replacement
- UPC: 019495760696
- Part Description: OE Solutions Front Differential Ring And Pinion
$123.86Product Specifications- Notes: Master Kit; 8.25" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499415
- Width: 2.50"
- Part Description: Front Master Differential Rebuild Kit
$9.96Product Specifications- Notes: with AAM Engine;with 8.625in Ring Gear;10 Bolt;Rear
- Contains Applications: Y
- Material: Fiber
- Mount Hole Quantity: 10
- Thickness (in): 0.032"
- UPC: 023913682606
- Part Description: Axle Housing Cover Gasket
OEM (Genuine) 2000 Cadillac Escalade Joint Kit-Front Axle Propeller Shaft Front Universal
PartNumber: 23104840$50.12 MSRP:$87.24You Save: $37.12 (43%)Product Specifications- Notes: All Models
- Other Names: Universal Joints
- Item Dimensions: 5.8 x 5.3 x 2.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26042371, 12471502, 12479126
- Part Description: Joint Kit-Front Axle Propeller Shaft Front Universal
$12.77Product Specifications- Notes: Grease Fitting in Cross; Perf Grade; Inside Lock Rings
- Bearing Cap Diameter: 1.125"
- Lock Ring Type: Internal
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286531055
- Part Description: Grade Performance™ Rear U-Joint
$5.13Product Specifications- Height (Inch): 1.30
- Length (Inch): 3.50
- UPC: 031447984073
- Width (Inch): 3.50
- Part Description: Universal Joint Strap Kit
Dorman® OE Solutions Front Driver Side Inner Axle Shaft for 2000 Cadillac Escalade
PartNumber: 630-420$223.65Product Specifications- ABS Tone Ring Installed: Not Included
- Hole Quantity: 6
- Length: 5.04"
- Material: Carbon Steel
- OE Part Number: 26058813
- Spline Quantity: 28 Spline
- UPC: 019495488217
- Wheel Lug Quantity: 6
- Part Description: OE Solutions Front Driver Side Inner Axle Shaft
$418.10Product Specifications- Notes: with 40-1/4" (1022 mm) Long Driveshaft;Measurement is taken from end of input shaft to center of U-Joint
- Greasable: No
- Length: 40.25"
- Length (mm): 1022,35
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Remanufactured Driveshaft/ Prop Shaft
Dorman® OE Solutions Rear Differential Ring And Pinion for 2000 Cadillac Escalade
PartNumber: 697-300$240.53Product Specifications- Notes: w/3.42 Axle Ratio; 8.625" Ring Gear
- Gear Ratio: 3.42
- Item Grade: Standard Replacement
- OE Part Number: 1258710, 26037720
- UPC: 019495105398
- Part Description: OE Solutions Rear Differential Ring And Pinion
OEM (Genuine) 2000 Cadillac Escalade Joint Kit-Front Axle Propeller Shaft Front Universal
PartNumber: 23104840$50.12 MSRP:$87.24You Save: $37.12 (43%)Product Specifications- Notes: All Models
- Other Names: Universal Joints
- Item Dimensions: 5.8 x 5.3 x 2.8 inches
- Item Weight: 1.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26042371, 12471502, 12479126
- Part Description: Joint Kit-Front Axle Propeller Shaft Front Universal
$100.39Product Specifications- Notes: Std Kit; 8.25" Ring Gear:
- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499347
- Width: 2.50"
- Part Description: Front Differential Rebuild Kit
$32.48Product Specifications- Notes: FAG Global# F563826; 1.024" Wide Brg; 1.024" Width
- Bearing Inside Diameter: 1.614; 40.996
- Bearing Outside Diameter: 2.795; 70.993
- Height: 1.024; 26
- Inside Diameter: 1.614; 41
- Length: 1.024; 26.01
- Outside Diameter: 2.795; 71
- UPC: 670774135934
- Part Description: Rear Axle Shaft Bearing
$12.30Product Specifications- Notes: with AAM Axle; Independent Front Suspension; with 8.25in Ring Gear
- Part Description: Differential Bearing
$17.07Product Specifications- Notes: with AAM Axle; with 8.625in Ring Gear;with AAM Axle; Independent Front Suspension; with 8.25in Ring Gear
- UPC: 724956020683
- Part Description: Front Outer Differential Pinion Bearing
$51.44Product Specifications- Notes: Repair
- Inside Diameter: 1.625"
- Outside Diameter: 2.842"
- UPC: 085311161350
- Width: 1.165"
- Part Description: Rear Axle Shaft Bearing Assembly
$14.61 MSRP:$24.17You Save: $9.56 (40%)Product Specifications- Notes: All Models
- Other Names: Cover Gasket, Gasket, Housing Cover Gasket
- Item Dimensions: 24.5 x 12.5 x 3.1 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26016662, 26066456
- Part Description: Housing Cover Gasket
Dorman® Oe Solutions Rear Differential Ring And Pinion for 2000 Cadillac Escalade
PartNumber: 697-810$217.97Product Specifications- Notes: 8.625" Ring Gear; w/3.23 Axle Ratio
- Gear Ratio: 3.23
- Item Grade: Standard Replacement
- UPC: 037495175821
- Part Description: Oe Solutions Rear Differential Ring And Pinion
$9.26Product Specifications- Notes: with AAM Differential; with 8.625in Ring Gear;with AAM Differential; Independent Front Suspension; with 8.25in Ring Gear
- Cup Bore: 3.2500" / 82.55 mm
- Cup Length: 0.7950" / 20.193 mm
- Cup Radius: 0.1250" / 3,175 mm
- Part Description: Automatic Transmission Transfer Shaft Race
$90.26Product Specifications- Notes: Supplied with Standard Neoprene Outboard Boot
- ABS Ring Included: No
- Axle Nut Locking Type: Self Lock
- Input Shaft Bolt Count: 6
- Input Shaft Connection Style: Bolt-On
- Length: 21"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 33
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 21mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M24 x 2.0
- Part Description: Remanufactured CV Axle Assembly
$36.28Product Specifications- Notes: 9.50" Ring Gear
- Cone ID: 2.1654"
- Cone Length: 0.905"
- Cone Radius: 0.14"
- Cup Length: 0.807"
- Cup Radius: 0.02"
- Outside Diameter: 3.543"
- UPC: 085311885607
- Width: 0.984"
- Part Description: Rear Axle Shaft Bearing Kit
$15.21Product Specifications- Notes: with AAM Axle; Independent Front Suspension; with 8.25in Ring Gear
- Part Description: Front Outer Axle Shaft Bearing
$48.53 MSRP:$96.32You Save: $47.79 (50%)Product Specifications- Notes: All Models
- Location: Driver Side; Passenger Side
- Item Dimensions: 3.4 x 3.4 x 1.2 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 9442126, 09442126
- Part Description: Rear Wheel Bearing
1-30 of 196 Results
< Previous
12345
Next >