50 products about Land Rover Driveline, Axles & 4WD found
Filter Results
Sort
View by
Product Specifications- Type: A-1
- Part Description: Land Rover Differential Bearing
Product Specifications- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.220"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286501539
- Part Description: Land Rover Grade Performance™ Rear U-Joint
More Info Product Specifications- Greasable: Yes
- Length: 24.25"
- Length (mm): 615,95
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Land Rover Remanufactured Driveshaft/ Prop Shaft
More Info Product Specifications- Outer Diameter: 1.063"
- Outside Lock-Up 1: 2.935"
- UPC: 085311099479
- Part Description: Land Rover Rear U Joint
More Info Product Specifications- Bore (Inch): 1.9685
- Bore (mm): 50.00
- Cone Length (Inch): 0.7874
- Cone Length (mm): 20.00
- Cone Radius (Inch): 0.0591
- Cone Radius (mm): 1.5000
- Cup Length (Inch): 0.6102
- Cup Length (mm): 15.4990
- Cup Radius (Inch): 0.0200
- Cup Radius (mm): 0.5080
- Design: ISO Metric
- Outside Diameter (Inch): 3.1496
- Outside Diameter (mm): 80.00
- Series: 32000
- Standout (Inch): 0.1772
- Standout (mm): 4.5000
- Type: TS
- UPC: 724956092055
- Width (Inch): 0.7874
- Width (mm): 20.00
- Part Description: Land Rover Differential Bearing
More Info Product Specifications- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.94
- Length Axis 2: 2.94
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286011007
- Weight (Gross Pounds): 1.0
- Width (Inch): 3.50
- Part Description: Land Rover Grade Standard U-Joint
More Info Product Specifications- Greasable: Yes
- Length: 24.375"
- Length (mm): 620
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Land Rover Remanufactured Driveshaft/ Prop Shaft
More Info Product Specifications- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099226
- Part Description: Land Rover Front Greaseable U Joint
More Info Product Specifications- Type: A-1
- Part Description: Land Rover Driveshaft Center Support Bearing
Product Specifications- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.06
- Bearing Cap Type: Plain
- Dimension: 1.063" Cap Diameter
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 3.22
- Length Axis 2: 3.22
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- Style: 4 Round Plain Bearings
- UPC: 826732164021
- Weight (Gross Pounds): 1.10
- Width: 3.218" Overall Axis
- Width (Inch): 3.50
- Part Description: Land Rover Spicer 1310 Series Grade Standard U-Joint
More Info Product Specifications- Greasable: Yes
- Length: 23.25"
- Length (mm): 590
- Material: Steel
- Measurement Method: Measurement is taken from the face of the flange on one end to the face of the flange on the other end of a collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Land Rover Remanufactured Driveshaft/ Prop Shaft
More Info Product Specifications- Cone ID: 1.7812"
- Cone Length: 0.7812"
- Cone Radius: 0.1400"
- Cup Length: 0.5937"
- Cup Radius: 0.0300"
- Outer Diameter: 3.0625"
- UPC: 085311068840
- Width: 0.7812"
- Part Description: Land Rover Rear Differential Bearing
More Info Product Specifications- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: Land Rover Driveshaft Center Support Bearing
More Info Product Specifications- Bearing Cap Axis 1 Diameter: 0.94
- Bearing Cap Axis 2 Diameter: 23.83
- Bearing Cap Type: Plain
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.41
- Length Axis 2: 2.41
- Lock Ring Location: External
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286128224
- Width (Inch): 3.50
- Part Description: Land Rover Grade Standard U-Joint
More Info Product Specifications- Drive Shaft Material: Steel
- E-Waste: No
- Greasable: Yes
- Length (in): 23.75
- Length (mm): 603
- Measurement Method: Measurement Taken from End of Flange Face to End of Flange Face
- Product Condition: New
- Tubing Outer Diameter (in): 2
- Tubing Outer Diameter (mm): 51
- Part Description: Land Rover Remanufactured Driveshaft/ Prop Shaft
More Info Product Specifications- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099219
- Part Description: Land Rover Front Non Greaseable U Joint
More Info Product Specifications- Type: 87
- Part Description: Land Rover Differential Crankshaft Seal
Product Specifications- ABS Ring Included: No
- Axle Nut Locking Type: Stake
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 25
- Length: 24 13/16"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 28
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 35-36mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M24 x 1.5
- Part Description: Land Rover Remanufactured CV Axle Assembly
More Info Product Specifications- Outer Diameter: 1.063"
- Outside Lock-Up 1: 3.218"
- UPC: 085311099677
- Part Description: Land Rover Front U Joint
More Info Product Specifications- ABS Ring Included: No
- Axle Nut Locking Type: Stake
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 25
- Length: 23 3/8"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 28
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 35-36mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M24 x 1.5
- Part Description: Land Rover Remanufactured CV Axle Assembly
More Info Product Specifications- Cup Length: 0.593"
- Cup Radius: 0.030"
- Outside Diameter: 3.063"
- UPC: 085311057219
- Width: 0.781"
- Part Description: Land Rover Rear Axle Shaft Bearing Race
More Info Product Specifications- UPC: 805890720928
- Part Description: Land Rover Premium™ Axle Shaft Seal
Product Specifications- UPC: 805890720935
- Part Description: Land Rover Premium™ Axle Shaft Seal
Product Specifications- Bore: 2.75"
- Boretite: Yes
- Outer Diameter: 2.754"
- Shaft: 1.750"
- UPC: 085311018708
- Width: 0.313"
- Part Description: Land Rover Front Differential Pinion Seal
More Info Product Specifications- Cone Bore: 1.7812" / 45.242 mm
- Cone Length: 0.7812" / 19.842 mm
- Cone Radius: 0.1400" / 3.5560 mm
- Cup Bore: 3.0625" / 77.788 mm
- Cup Length: 0.6562" / 16.667 mm
- Cup Radius: 0.0310" / 0,787 mm
- Standout: 0.0188" / 0,478 mm
- Taper Bearing Cone: LM603049
- Taper Bearing Cup: LM603012
- Width: 0.8437" / 21.43 mm
- Part Description: Land Rover Differential Bearing with Cup and Cone
More Info Product Specifications- Type: B
- Part Description: Land Rover Front Driver Side Axle Shaft Bearing
Product Specifications- Part Description: Land Rover Front Inner Differential Pinion Race
Product Specifications- Part Description: Land Rover Front Inner Differential Pinion Bearing
Product Specifications- Bearing Cap Diameter Axis 1: 1.063"
- Bearing Cap Diameter Axis 2: 1.063"
- Bearing Cap Finish: Steel
- Coating Type: Grease
- Color/Finish: Silver
- Greasable: No
- Grease Type: Multi Purpose Bearing Grease
- Grease Zerks Included: No
- Length Between Inside Snap Rings Axis 1: 3.219"
- Length Between Inside Snap Rings Axis 2: 3.219"
- Pre Greased: Yes
- Seal Material: Rubber
- Snap Ring Type: External
- Universal Joint Cross Material: Steel
- UPC: 885484839441
- Part Description: Land Rover OE Solutions Rear Driveshaft Repair Kit
More Info Product Specifications- ABS Ring Included: Yes
- ABS Ring Tooth Count: 48
- Axle Nut Locking Type: Stake
- Input Shaft Connection Style: Spline
- Input Shaft Spline Count: 29
- Length: 39 1/4"
- Output Shaft Connection Style: Spline
- Output Shaft Spline Count: 29
- Product Condition: Remanufactured
- Spindle Nut Hex Head Size: 38mm
- Spindle Nut Included: Yes
- Spindle Nut Thread Size: M24 x 1.5
- Part Description: Land Rover Remanufactured CV Axle Assembly
More Info