< Back ×
Jeep Grand Cherokee Driveline, Axles & 4WD
Select vehicle to guarantee fit
Make
Model
Year
- Differential
- Driveshaft
- Ring And Pinion
- Axle Shaft
- Differential Cover
- 4Wd Actuator
- Differential Rebuild Kit
- Cv Joint
- Universal Joints
- Axle Bearing
- Driveshaft Yokes
- Cv Joint Boot
- Differential Bearing
- Driveshaft Center Support Bearing
- Differential Seal
- Axle Shaft Seal
- Differential Cover Gasket
- Differential Mount
- Differential Crush Sleeve
- Axle Vent
- Differential Pinion Bearing
- Axle Beam Mount
- Axle Shaft Bearing Race
- Axle Shaft Retainer
- Axle Shaft Snap Rings
- Axle Support Bushings
- Differential Bearing Race
- Differential Disc Kit
- Double Cardan CV Centering Yokes
- Driveshaft Repair Kit
- Universal Joint Straps
- Universal Joint U-Bolt Kits
< Back to View All
Engine & Drivetrain
- Department
- Brands
- Prices
$480.27Product Specifications- Drive Shaft Diameter (In): 2 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 36"
- Material: Steel
- Outside Diameter: 2"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic
- UPC: 037495353168
- Wall Thickness: 0.083"
- Part Description: Jeep Grand Cherokee OE Solutions Front Driveshaft
$382.17Product Specifications- Drive Shaft Diameter (In): 2 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 31.5"
- Material: Steel
- Outside Diameter: 2"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic/Manual
- UPC: 037495353274
- Wall Thickness: 0.083"
- Part Description: Jeep Grand Cherokee OE Solutions Front Driveshaft
$308.73Product Specifications- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 30.28"
- Material: Carbon Steel
- OE Part Number: 4856333
- Spline Quantity: 30 Spline
- UPC: 019495045861
- Wheel Lug Quantity: 5
- Part Description: Jeep Grand Cherokee OE Solutions Rear Driver Side Axle Shaft
$309.02Product Specifications- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 32.36"
- Material: Carbon Steel
- OE Part Number: 5012873AA
- Spline Quantity: 30 Spline
- UPC: 019495147053
- Wheel Lug Quantity: 5
- Part Description: Jeep Grand Cherokee OE Solutions Rear Driver Side Axle Shaft
$200.61Product Specifications- Drive Shaft Diameter (In): 2 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 32.5"
- Material: Steel
- Outside Diameter: 2"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic
- UPC: 037495353151
- Wall Thickness: 0.083"
- Part Description: Jeep Grand Cherokee OE Solutions Front Driveshaft
$170.97Product Specifications- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499446
- Width: 2.50"
- Part Description: Jeep Grand Cherokee Rear Master Differential Rebuild Kit
$265.75Product Specifications- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 29.28"
- Material: Carbon Steel
- OE Part Number: 4856332
- Spline Quantity: 30 Spline
- UPC: 019495073017
- Wheel Lug Quantity: 5
- Part Description: Jeep Grand Cherokee OE Solutions Rear Passenger Side Axle Shaft
$425.72Product Specifications- Greasable: No
- Length: 30.312"
- Length (mm): 770
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Grand Cherokee Remanufactured Driveshaft/ Prop Shaft
$108.74Product Specifications- Part Description: Jeep Grand Cherokee Rear Differential Master Bearing Kit
$166.64Product Specifications- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311487122
- Width: 2.50"
- Part Description: Jeep Grand Cherokee Rear Master Differential Rebuild Kit
$262.15Product Specifications- ABS Tone Ring Installed: Not Included
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 29.78"
- Material: Carbon Steel
- OE Part Number: 4762195
- Spline Quantity: 27 Spline
- UPC: 019495045854
- Wheel Lug Quantity: 5
- Part Description: Jeep Grand Cherokee OE Solutions Rear Driver Side Axle Shaft
$415.75Product Specifications- Greasable: Yes
- Length: 29.625"
- Length (mm): 753
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Grand Cherokee Remanufactured Driveshaft/ Prop Shaft
$48.72Product Specifications- Type: A-1
- Part Description: Jeep Grand Cherokee Differential Bearing
$151.55Product Specifications- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311487146
- Width: 2.50"
- Part Description: Jeep Grand Cherokee Rear Master Differential Rebuild Kit
$16.70Product Specifications- Bearing Cap Axis 1 Diameter: 1.06
- Bearing Cap Axis 2 Diameter: 1.08
- Bearing Cap Type: Grooved
- Greasable: Yes
- Height (Inch): 1.30
- Length (Inch): 3.50
- Length Axis 1: 2.12
- Length Axis 2: 3.22
- Lock Ring Location: External, Internal
- Lube Fitting Location: Grease Fitting in Cross
- Material: Steel With Black Oxide Coating
- Mounting Hardware Included: Yes
- UPC: 083286403536
- Weight (Gross Pounds): 1.10
- Width (Inch): 3.50
- Part Description: Jeep Grand Cherokee Grade Standard U-Joint
$35.41Product Specifications- Part Description: Jeep Grand Cherokee Front Inner Differential Bearing
$261.58Product Specifications- ABS Tone Ring Installed: Yes
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 31.75"
- Material: Carbon Steel
- OE Part Number: 5012821AA
- Spline Quantity: 27 Spline
- UPC: 019495126157
- Wheel Lug Quantity: 5
- Part Description: Jeep Grand Cherokee OE Solutions Rear Driver Side Axle Shaft
$383.70Product Specifications- Greasable: No
- Length: 32.875"
- Length (mm): 836
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Grand Cherokee Remanufactured Driveshaft/ Prop Shaft
GMB® U-Joint for Jeep Grand Cherokee
PartNumber: 214-1309$16.43Product Specifications- Height (Inch): 1.30
- Length (Inch): 3.50
- UPC: 083286217706
- Weight (Gross Pounds): 1.30
- Width (Inch): 3.50
- Part Description: Jeep Grand Cherokee U-Joint
$29.93Product Specifications- Type: A-1
- Part Description: Jeep Grand Cherokee Driveshaft Center Support Bearing
$383.70Product Specifications- Greasable: Yes
- Length: 33.5"
- Length (mm): 851
- Material: Steel
- Measurement Method: Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Grand Cherokee Remanufactured Driveshaft/ Prop Shaft
$103.69Product Specifications- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311499255
- Width: 2.50"
- Part Description: Jeep Grand Cherokee Rear Differential Rebuild Kit
$243.27Product Specifications- Drive Shaft Diameter (In): 2 In.
- Drive Shaft Wall Thickness (In): 0.083 In.
- Grade Type: Standard
- Greaseable Drive Shaft: Yes
- Length: 35.125"
- Material: Steel
- Outside Diameter: 2"
- Overall Length Adjustable: Yes
- Transmission Type: Automatic/Manual
- UPC: 037495353267
- Wall Thickness: 0.083"
- Part Description: Jeep Grand Cherokee OE Solutions Front Driveshaft
$15.40Product Specifications- Bearing Cap Diameter: 1.063"
- Lock Ring Size: 3.622"
- Lock Ring Type: External
- Lubrication Method: Grease Fitting in Cross
- UPC: 083286512030
- Part Description: Jeep Grand Cherokee Grade Performance™ Rear U-Joint
$21.86Product Specifications- Bore (Inch): 1.378
- Bore (mm): 35.00
- Design: Single Row Radial
- Inner Race Bore (Inch): 1.378
- Inner Race Bore (mm): 35.00
- Inner Race Radius (Inch): 0.040
- Inner Race Radius (mm): 1.020
- Inner Race Width (Inch): 0.669
- Inner Race Width (mm): 17.00
- Outer Race Outside Diameter (Inch): 2.835
- Outer Race Outside Diameter (mm): 72.00
- Outer Race Radius (Inch): 0.040
- Outer Race Radius (mm): 1.020
- Outer Race Width (Inch): 0.669
- Outer Race Width (mm): 17.00
- Outside Diameter (Inch): 2.835
- Outside Diameter (mm): 72.00
- Series: 200
- Type: A-1
- Width (Inch): 0.669
- Width (mm): 17.00
- Part Description: Jeep Grand Cherokee Driveshaft Center Support Bearing
$378.03Product Specifications- Greasable: Yes
- Length: 31.875"
- Length (mm): 810
- Material: Steel
- Measurement Method: Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft
- Product Condition: Remanufactured
- Part Description: Jeep Grand Cherokee Remanufactured Driveshaft/ Prop Shaft
$104.86Product Specifications- Inner Diameter: 11.0"
- Outer Diameter: 11.50"
- UPC: 085311470766
- Width: 2.50"
- Part Description: Jeep Grand Cherokee Rear Differential Rebuild Kit
$20.58Product Specifications- Part Description: Jeep Grand Cherokee Front Inner Differential Pinion Bearing
$13.65Product Specifications- Bearing Cap Diameter: 1.063"
- Lock Ring Type: Internal
- Lubrication Method: Sealed Unit
- UPC: 083286502604
- Part Description: Jeep Grand Cherokee Grade Performance™ Front U-Joint
$207.67Product Specifications- ABS Tone Ring Installed: Yes
- Axle Type: Solid Shaft Axle
- Hole Quantity: 5
- Length: 29.06"
- Material: Carbon Steel
- OE Part Number: 4762194
- Spline Quantity: 27 Spline
- UPC: 019495095262
- Wheel Lug Quantity: 5
- Part Description: Jeep Grand Cherokee OE Solutions Rear Passenger Side Axle Shaft
1-30 of 816 Results
< Previous
12345
Next >